The Pepwave HD1 Dome is a industrial grade mobile router that integrates a single CAT 18 modem with a 4x4 MIMO cellular antenna. By integrating the modem and antenna into a single dome enclosure cellular reception is maximized with minimal loss due to antenna cables. The HD1 dome is a fully functional mobile router complete with all features and functionality of traditional Pepwave mobile routers. While the HD1 Dome does not have WiFi capabilities, it does have Pepwave's AP Controller allowing it to be paired with Pepwave Wireless Access Points such as the AP Mini or AP One AX providing the user with a centralized cellular, router and wireless management console for easy management. The HD1 Dome must be powered by Power Over Ethernet (PoE) which can be provided by an ethernet switch or by a PoE injector available separately. The Optional SIM Injector includes an integrated 4 port switch and PoE along with providing 8 additional remote sim cards for total flexibility.
The HD1 Dome provides single-cellular Bandwidth Bonding in an IP67 enclosure that has a minimal profile on the rooftop while providing maximum signal. With redundant SIM, the HD1 Dome supports single cellular radios and four SIM cards. Combine the HD1 Dome with the optional SIM Injector, and the number of SIM cards increases to twelve allowing you to switch sim cards without having to access the dome which may be mounted permanently up high.
When purchasing the HD1 Dome and the SIM Injector at the same time, you get the SIM Injector at a discounted price of $999 (compared to when separate of $1,499). This price is only availible when purchasing together.
Recommended Use Case
For the serious mobile enthusiast the HD1 Dome can be an RV'rs primary internet solution. With 4 onboard sim card slots multiple carrier support is not an issue. We recommend customers pair the dome with a AP One AX
or AP One Mini
Access Point for local WiFi. Note this solution will rely on cellular for internet. Campground WiFi or WiFi-As-WAN is not supported in this configuration. For customers who are taking it to the next level and also wish to take advantage of WIFI as WAN, customers can pair the HD1 Dome with a Pepwave Transit CAT 18
or Transit DUO
to provide up to 3 concurrent cellular connections. With optional Speedfusion Bonding these multiple SIMs can be combined using Speedfusion bonding for truly unbreakable connectivity.
The HD1 Dome is also highly popular for marine use especially on larger vessels where running long cables throughout is not optimal and would create significant signal loss. The single CAT 5e cable run up to the antenna bridge can make for simplified cable installation with significant improvement to cellular signal reception since no loss is occurring with lengthy antenna wires.
Minimum Cable Loss, Best Cellular Signal Quality
Most outdoor deployments require a centrally placed router attached to strategically placed antennas. With the HD1 Dome, the antennas are placed in the same integrated enclosure as the cellular radios. This arrangement minimizes cable loss, giving you the best signal possible.
Simple Installation Running a Single Ethernet Cable
The HD1 Dome has a M35 screw mount, and only requires a single Ethernet cable to install. For wall or pole mounted deployments, the HD1 Dome comes with an Ethernet splitter and a mounting rack that provides a multitude of installation options.
4 Onboard SIM slots + 8 Additional SIM With the optional SIM Injector
With the addition of the SIM Injector, the HD1 Dome can support up to 12 SIM at your fingertips. Simply connect an Ethernet cable between the SIM Injector and the HD1 Dome. The SIM Injector is capable of PoE output, so you don’t need to add another PoE switch to your deployment.
Multiple Mounting Options
The HD1 Dome offers significant deployment flexibility due to its modular construction. By itself, it has an M35 thread, making it easy to mount on top of any pole or on the rooftop of any vehicle.
The HD1 Dome comes with an Ethernet splitter that enables an additional GE LAN output. With the splitter installed, the HD2 Dome can then be used with the included mounting bracket to fix onto any wall, or to securely tie onto any pole.
The HD1 Dome, Ethernet splitter, and the mounting bracket are all included, so you can deploy this device just about anywhere.
|Software||Pepwave MAX Firmware|
Support for PPPoE, Static IP, DHCP
WAN Link Health Check
Bandwidth Allowance Monitor
USB 3G/4G LTE Modem Support
Support for Dynamic DNS services
DHCP Server for LAN Clients
Extended DHCP Option
DNS Proxy for LAN Clients
VLAN on LAN Support
Per-Service Load Distribution
Fastest Response Time
|Complete VPN Solution |
256-bit AES Encryption
Pre-shared Key Authentication
X.509 Certificate Support
PPTP VPN Server
RADIUS, LDAP Authentication
IPsec VPN (Network-to-Network) *
X.509 Certificate Support
NAT and IP Forwarding
Many to One, One to One NAT
SIP ALG, H.323 ALG
VRRP HA support
Individual Bandwidth Limit
By User Groups
SIP, HTTPS, VPN QoS
Custom Application QoS
|AP Controller |
AP Controller Support
Wi-Fi Usage Statistics
|Captive Portal Support |
Support for Wired and Wireless LAN Clients
Support RADIUS Authentication
Time and Usage Quotas on Open Access Mode
Built-in Customizable Splash Page
Web Administrative Interface
Command Line Interface
InControl Cloud Management
Active Client and Session Lists
Bandwidth Usage Statistics
SNMP v1, v2c and v3
*IPsec VPN supports connection with Cisco, Juniper, Peplink, or Pepwave devices.
All specifications are subject to change without notice.