A great addition to your cellular mobile router including our Pepwave line of products. This antenna will provide 2x MIMO 4G cellular antennas plus 1xGPS in a convenient RV friendly antenna package to the roof of your RV.
The MIMO-3-V2-13 consists of a 3-in-1 antenna system within a single housing, providing 2x Cellular and a GPS/GLONASS. This antenna is specifically designed for the transportation and marine industry. The 2x Cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 690MHz to 2700MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. This antenna, due to its wide band capabilities, can be used across different operators and technologies and is ready for future cellular technologies such as 5G up to 3.8GHz. The third antenna is a high-performance active GPS/GLONASS system operating down to -40 degrees. The antenna exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omni-directionality, pattern diversity and good radiation abilities at the desired elevation, which is important for this type of antenna, especially for the transportation and marine market. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining future-proof over the wide frequency band offered by this antenna.
- 2G/3G/4G/LTE antenna (5G Ready)
- 2 x MiMo LTE & GPS / GLONASS
- Ultra-Wideband, includes 450MHz and 3.5GHz CBRS Bands
- Robust and water resistant (IP68) antenna
- Ideal for transportation & marine use
- Multi mounting options for easy installation:
- Spigot mount (removable 40mm & 80mm lengths included)
- Surface mount (using 6 x M4 screws and/or adhesive tape)
- Magnet mount (optional kit available)
NOTE: THESE ANTENNAS ARE SUITABLE FOR INSTALLATION ON FIBERGLASS ROOFS AND DO NOT REQUIRE A GROUNDING PLATE. A 16''x16'' GROUNDING PLATE CAN BE USED AND CAN IMPROVE CELLULAR PERFORMANCE BY 1-3db IN CERTAIN SITUATIONS BUT IS NOT REQUIRED.
**NOTE: If you are adding a cellular booster such as a Weboost then adding a roof antenna to your Pepwave will mean that your Pepwave will not take advantage of your booster. Either add a MIMO cellular antenna or a booster to your setup, both are not generally recommended. Both options have pros/cons so we recommend you send us a chat request if you are unsure of which is best for you**
The Poynting Mimo-3 3-in-1 Cellular antenna comes with approximately 6.8 ft of included cable that can be directly connected to a Pepwave or Cradlepoint router using the included SMA connections. You can also extend these cables using (3) low-loss antenna cables
(recommended for under 15 feet extensions) or ultra-low-low antenna cables
for runs over 20 ft in total length. For short extensions we also have a standard low loss 10ft cable