Poynting’s PUCK-5 antenna offers a small profile antenna for use in the IoT/M2M, Smart Meter, Smart Utilities and Transportation markets. This 5-in-1 antenna boasts 2×2 MIMO LTE, 2×2 MIMO Wi-Fi (Dualband 2.4GHz & 5GHz) and GPS/GLONASS within the same enclosure, while keeping implementation as simple as possible with its many mounting options. Due to excellence in engineering and a solid design, this antenna provides exceptional performance for its small size.
The 2x Cellular MIMO antennas (for 2G/3G/4G) cover the 698MHz to 3800MHz band, which includes the most popular international LTE bands. The antenna provides 2x dual-band Wi-Fi antennas, providing concurrent 2.4GHz and 5GHz on each antenna, capable of 802.11n, 802.11ac and the new 802.11ax with 2×2 MIMO. The fifth antenna is a high-performance active GPS/GLONASS system operating at temperatures as low as -40ºC.
Poynting’s new PUCK antenna range provides easy installation with multiple mounting options. This includes as standard:
- Spigot Mount – two different lengths included (40mm & 80mm)
- Vertical Pole mount (inner & outer mounting for smaller and larger poles)
- Horizontal Pole Mount (e.g. marine rails)
- Surface Mount (Double Sided Tape)
NOTE: THESE ANTENNAS ARE SUITABLE FOR INSTALLATION ON FIBERGLASS ROOFS AND DO NOT REQUIRE A GROUNDING PLATE. A 16''x16'' GROUNDING PLATE CAN BE USED AND CAN IMPROVE CELLULAR PERFORMANCE BY 1-3db IN CERTAIN SITUATIONS BUT IS NOT REQUIRED.
**NOTE: If you are adding a cellular booster such as a Weboost, adding a roof antenna to your Pepwave will mean that your Pepwave will not take advantage of your booster. Either add a MIMO cellular antenna or a booster to your setup, both are not generally recommended unless you plan to manually switch between. Both roof antenna and cell booster options have pros/cons so we recommend you send us a chat request if you are unsure of which is best for you**